0
This is hard to explain so please see the attached screenshots. images 1 to 4 demonstrate the orchestration working correctly.

Images 5 and 6 show how the field does not get updated if I add an additional 'value' to the array.

Image 7 shows what the debug SHOULD look like (created by explicitly entering the values in the webservice step, instead of using a 'working data' variable).

Thanks!
Responses (4)
  • Accepted Answer

    Wednesday, May 22 2013, 12:08 PM - #Permalink
    0
    Aaron,

    See if you can pull enough out of this kb doc to help.

    http://knowledgebase.serena.com/infoc...
    The reply is currently minimized Show
  • Accepted Answer

    Wednesday, May 22 2013, 12:12 PM - #Permalink
    0
    Thanks a lot Brian. I found that one, but it seems not to address the part that I'm struggling with.
    The reply is currently minimized Show
  • Accepted Answer

    Wednesday, May 22 2013, 12:18 PM - #Permalink
    0
    Also tried setting the 'setValueMethod' to 'APPEND-VALUES' but that didn't work.
    The reply is currently minimized Show
  • Accepted Answer

    Wednesday, May 22 2013, 03:12 PM - #Permalink
    0
    My actual project (not the example I provided) uses a ForEach loop to construct the array. I tried using the loop to directly invoke (or set?) the ‘UpdateItem’ webservice with each iteration instead, and that worked.
    The reply is currently minimized Show
Your Reply

Recent Tweets